Let's See What We Have Here

When a C6 Corvette seat is removed from a Corvette and the seat belt pretensioner (seat belt buckle) is not needed, this seat belt pretensioner sim plug will remove the SIR light from the dash.

1968-1976 Chevrolet 6 Speed Shift Pattern For Richmond. Shipping cost included.

Vetteworks offers fire extinguisher mounting brackets for installation in front of either the driver seat ('68-'80) or passenger seat ('68 - '82 ) C3 Corvettes. All brackets fasten to the front two bolts of the seat mount. They must be installed with the seat adjusted fully back and there will be no seat adjustment once the bracket are installed. The C3 brackets will only mount on the passenger side for '81 and '82 Corvette because of the power seat. The brackets can come with a choice of a Amerex 2.5 lbs red or chrome dry chemical, Halotron or Halon fire extinguishers. All fire extinguishers come double strapped at no extra charge. The C3 Fire Extinguisher brackets are constructed of cold rolled steel, precision laser machined parts, MIG welded and are powder coated mat black finish. Note: Vetteworks brackets only work with Amerex 2.5 LBS fire extinguishers.

2005 Corvette Passenger seat airbag simulator kit

When the OEM driver seat is removed and replaced with aftermarket seats. The SIR Airbag dash warning lamp will illuminate due to the break in the SIR circuitry.

The "C6 Sharkbar Carbon " is a bolt-in harness bar for 2005 to 2013 coupes, including the GS, Z06 & ZR1 Corvettes.

The Vetteworks C6/C7/C8 Corvette Lap belt bar provides mounting anchors for aftermarket lap and sub anchors for 6 pt belts.

Vetteworks stud extender to allow the use of our lap belt bar for C5 Corvette when used with BK, RD, etc harness bar. This kit includes adapter, washer and nut. Two are required for most applications per car.

Vetteworks C4 LSX Conversion engine plates are designed to place the LS engine at the correct location so the Differential Carrier Brace will line up to the transmission tail shaft. Designed for 4L60,4L65 or 4L70 transmissions. It will be necessary to cut 2 slots out of the front cross member to clear the front of the engine pan. You will need tail shaft adapter for automatic applications.

When the OEM passenger seat is removed and replaced with aftermarket seats. The SIR Airbag dash warning lamp will illuminate due to the break in the SIR circuitry.