Corvette Shart Bar series 2

Sharkbar Series 2

Vetteworks is the manufacturer of The Shark Bar ™ Series 2 C3 Corvette Harness Bar. It installs into all late model C3 without any major modifications. The Series 2 Harness Bar will keep occupants securely in place when autocrossing and exceeds NHRA/SFI standards in reference OEM seats. The '78 thru '80 harness bars comes with the necessary brackets to equip the driver and passenger for a 5-pt harness. The Anti-submarine brackets is come with quick release clips so the anti-submarine (crotch) belt can be removed easily. The '81 thru '82 Corvette come with a different style of lap/ anti submarine bracket due to the driver side power seat. The crotch bracket on these model does not allow for a quick release clip and the driver seat will have to be adjusted all the way back and leaves very little forward seat adjustment. The Shark Bar ™ Series 2 attaches to the existing seat belt anchors and doesn't block access to the rear compartments or sun shade. The lap belt brackets use the existing lap belt anchors, but position the lap belt further behind the seat so the lap belts will align at a 45 degree angle across the occupants mid section. The anti-submarine (crotch) brackets can be ordered with a mount to secure a fire extinguisher. The Shark Bar use a 3" individual style aftermarket belts. The Shark Bar ™ Series 2 has other accessories available. To Purchase the Shark Bar "click on" the Catalog button.

The instruction manual is a 3 meg file, if the pdf file does not open properly, download the file by right clicking the mouse over instruction button and click on:

" Save target as "

Vetteworks LLC products and parts warranties are voided if the vehicle or part is used for competition or if they fail as a result of modification. It is the purchaser/drivers responsibility to inspect the dimensions, specifications, and performance of all parts as being appropriate for the use to which the purchaser/driver will put them prior to any actual installation and use of said products and/or parts. Products and parts are sold "as is" without any warranty whatsoever. Implied warranties, including warranties of merchantability or fitness for a particular purpose, are excluded. The entire risk of quality and performance of such parts is with the buyer. Should such parts prove defective following their purchase, the buyer and not the manufacturers, distributors, or retailers, assume the entire cost of all necessary services or repair. The purchaser/driver is on notice that racing competition is an inherently dangerous activity, which can result in serious personal injury and even death to participants and even to spectators. If these parts and/or products are used in motor sport competition, any and all risk of and liability for any resulting damage, injury or death is with the purchaser/driver.

Vetteworks LLC in no event shall be held liable for special or consequential damages.